Emulator Issues #3931
closed
Crash when configuring gamepad input with PS3 controller.
0%
Description
Crashing when attempting to configure input from a PS3 controller. Controller appears as "HID/5/PLAYSTATION(R)3 Controller." Dolphin quits unexpectedly when selecting a button to bind. Problems exist with other controllers: Logitech Dual Action, and Logitech RumblePad 2; left, down, and right on d-pad stick, but don't cause a crash.
Dolphin version with the problem (as it appears in the title bar, Ex.: "R
4779" or "R 6403M"): r6851
(optional) Dolphin version that does not have the problem: GCPad configuration works fine in r6839, but breaks in later revisions.
Operating system and version: OS X 10.6.6, 64-Bit.
Updated by soren.jorvang almost 14 years ago
- Status changed from New to Accepted
- Category set to controls
- Operating system OS X added
Send me the output from "HID_Dumper -elements" with all those controllers attached.
HID_Dumper is available from issue 3929.
Updated by soren.jorvang almost 14 years ago
- Status changed from Accepted to Work started
r6863 should fix the d-pads, but do send me the HID dump anyway.
Updated by celgilles almost 14 years ago
@soren.jorvang: While the XBox 360 Controller works good since revision r6863, it appears as Device "HID/5/Controller/" in the GCPad Configuration Panel.
Here the output of "HID_Dumper" on OSX 10.6.6 for the XBox 360 controller:
Device: 0x400660 = { ©Microsoft Corporation - Controller, vendorID: 0x045E, productID: 0x028E, usage: 0x0001:0x0005, Transport: "USB", SerialNumber: "xxxxxxx", locationID: 0xFD141000, MaxInputReportSize: 14, ReportInterval: 8000, }
For the Playstation 3 Controller however it shows up correctly as "HID/5/PLAYSTATION(R)3 Controller" but crashes immediately.
Here's the output for "HID_Dumper -elements" with PS3 Controller attached "PS3-Controller-Dump.txt"
Updated by Noktaris almost 14 years ago
Can confirm that r6863+ fixes the d-pads, they're working nicely now. Thanks. Playstation 3 Controller still produces a crash as described above in r6865.
Updated by maugendre.ensiie almost 14 years ago
in r7010 still have the same nasty crash
Updated by fulano almost 14 years ago
I'm running into the same problem. Here a the crash log if it helps any.
(Sorry for multiple posts, I finally realized where I should post this.)
Updated by maugendre.ensiie almost 14 years ago
in r7127 still have the same nasty crash
I attached my crash log
Updated by soren.jorvang almost 14 years ago
Issue 4080 has been merged into this issue.
Updated by ironhalo almost 14 years ago
r7197 is also producing PS3 controller crash in GCpad and Wiimote config panels. Crash report and HID dumper output attached.
Updated by goalie_man91 over 13 years ago
Hey if noticed this problem aswell. this version is working for me
http://www.megaupload.com/?d=ZUE85IFA
Updated by Pseudonym.Maximillius over 13 years ago
Yeah i also confirm build 6839 works perfect with the PS3 controller, it shows the input device as SDL/0/PLAYSTATION(R)3 Controller
in the newer revisions that crash r7228 it shows:
Input/1/PLAYSTATION(R)3 Controller
Input/0/PLAYSTATION(R)3 Controller
Dunno if that helps...
Updated by soren.jorvang over 13 years ago
- Status changed from Work started to Fixed
This issue was closed by revision r7255.
Updated by ironhalo over 13 years ago
Sweet!! Thanks Soren, you rock! I can confirm PS3 controllers are working beautifully once again. Dolphin fans are lucky to have such dedicated developers!
Thanks again, I'm loving it!