Emulator

While the first test reports a low clock speed, if you run the test a second time, the disc will give a result more closely resembling the results from an actual GameCube.

http://i.imgur.com/H5I3uQ8.png

Tested on 5.0-14095 and I got "good" values first try every single time.

Using https://www.youtube.com/watch?v=69Tan_IhOFM (8:54) for console values:

• Flipper now reports a clock speed slightly faster than console but closer to it than before (161999388).
• Gekko is now reporting a clock speed of 485998164, again closer to console than before but slightly faster than it.
• Memory clocks seem to line up even better than they used to, since now ARAM reports 155MHz instead of 156.

On d1beb9ef7018c71a2336c62fa31bfe554083a3e7 I get:

Flipper core/Gekko bus freq = 161922755Hz (162MHz)
Gekko core freq =485768265 Hz (486 MHz)

The rest match real hardware (but only integer MHz values are printed).

How close is close enough? :)

I've retested this and got the same values as godisgovernment the first time I ran the test. On every subsequent run I got the same values as last time.

Ran the test several times on console just to make sure it wasn't doing anything funny, since the video only shows it being run once. The values stay the exact same across different runs of the test and reboots, which is exactly what I expected.